Set Inline Nylon Crowns - MB Slot

Set Inline Nylon Crowns - MB Slot

Unlike traditional inline crowns, where the crown is melt with the hub and the motor shaft guide, MB SLOT crowns are modular, as the plastic toothed part is separated from the hub and bushing for the crown centering.

The crowns are available with 24 25 26 27 teeth, they are all white and recognizable by the different diameter and the number of teeth engraved on the crown.

The crown codes are the following:
Art. 13024
Art. 13025
Art. 13026
Art. 13027

Each pack contains 4 crowns with the same number of teeth and the recommended retail price is 4.00€

To assemble the crown you need:
Art 12001 Stopper which works as a puller
Art A0732 Bushing for the crown centering
Art 19042 2 mm spacers, necessary to keep the bushing distant from the stopper
If you want to use a different system you can substitute the spacers with Art. 17020, which is a motor guide with ball bearings.
Otherwise you can use the motor guide of old MB SLOT crowns: Art. 17024 Art. 17025 Art. 17026 Art. 17027 in aluminium or brass.

The main features of these crowns are high sliding, resistance to use and lower cost: as you can re-use the stopper and the bushing, 1 crown costs 1,00€ against 4€-5€ of traditional crowns.