Anglewinder Nylon Crown 28z - Yellow

Anglewinder Nylon Crown 28z - Yellow

Any machine that can mount the Boxer in angular position can also use the Flat 6 .
However, on some models you can mount the Flat 6 but not the Boxer .
These , at present, are the Audi R8C Slot.it , the Radical Scaleauto , Toyota GT1 Scaleauto , and others will follow .

The new crowns can be used interchangeably in both cases and are divided into two categories :

a - Crowns GA1524 , GA1525 , GA1526 : 15mm diameter and 1.2mm thickness , teeth available 24, 25, 26. Have been studied in particular for machines type Audi R8C Slot.it , in which the thickness reduced to only 1.2mm allows easy installation under the wheel , but can also be used in all other cases .
In all cases , whether it is to assemble in the car with the Boxer that with the Flat 6 , must be fitted with a pinion from 6.5mm ( PS10. .. PS13 , or PI6510e PI6513e ... ) and a spacer from 1mm ( eg : PA51 ) between the bushing and the hub of the crown.

b - Crowns GA1627 , GA1628 , GA1629 and GA1626 future , GA1630 : 16mm in diameter and 1.5mm thick , teeth now available at 27, 28, 29 , 26 and 30 planned for the future . They can be used with machines that mount only the engine Flat both with those that mount indifferently Boxer and Flat: in the first case ( example : Audi ) , it will use a pinion 6mm ( as PI6010o , PI6011o ) and a spacer from 0.75mm (made from PA47 using 3 washers 0.25 ) to arrive at the correct position under the wheel and have a meshing silent and smooth.
In other cases , in machines so to say more ' universal ' , suggest a spacer from 0.1mm ( for example made from PA47 - 1 washer thickness of 0.1 ) and a pinion 6.5mm ( PS10. .. PS13 , or PI6510e .. . PI6513e ) .

The crowns series GA15 and GA16 , respectively, 0:53 and weigh 0.63g compensive of grub screw

SERIES FLAT

GA1524PL Crown Nylon 24 tooth teeth Anglewinder ø 15 mm Thickness 1.2 mm Weight 0,53 gr
GA1525PL Crown Nylon 25 tooth teeth Anglewinder ø 15 mm Thickness 1.2 mm Weight 0,53 gr
GA1526PL Crown Nylon 26 teeth teeth Anglewinder ø 15 mm Thickness 1.2 mm Weight 0,53 gr

SERIES REGULAR

GA1626PL Crown Nylon 26 teeth teeth Anglewinder ø 16 mm Thickness 1.2 mm Weight 0,63 gr
GA1627PL Crown Nylon 27 teeth teeth Anglewinder ø 16 mm Thickness 1.2 mm Weight 0,63 gr
GA1628PL Crown Nylon 28 teeth teeth Anglewinder ø 16 mm Thickness 1.2 mm Weight 0,63 gr
GA1629PL Crown Nylon 29 tooth teeth Anglewinder ø 16 mm Thickness 1.2 mm Weight 0,63 gr
GA1630PL Crown Nylon 30 tooth teeth Anglewinder ø 16 mm Thickness 1.2 mm Weight 0,63 gr