Cobalt Axels - 48mm and 2.37mm

Cobalt Axels - 48mm and 2.37mm

Cobalt Axels - 48mm and 2.37mm

More details

MB23748

3,70 €

Cobalt Axels - 48mm and 2.37mm

Diameters 2.36 to best fit the NSR products or if you want to give more play in the axle bushings with hole 2.37 mm .
Diameters 2.37 for most of the parts in trade .
The lengths have been designed to easily mount the axles on most slot cars without problems , especially where you want to leave the original wheel covers .
L ' Art 23749 has the appropriate measures to be mounted on cars of category CLASSIC , with a central part hollowed out to get away from the engine and ends with different lengths to center the axle on the media engine , the longer the side of the crown.

Fundamental to an axle and surface hardness . With this hardness grains can never ruin it , compromising the assembly and disassembly of rims, hubs and crowns.
How important is the surface , which will make it very smooth over time the axle that runs bushings.
The bushings will never have the chance to mark it and do not ruin the bushings for smooth surface and lasts axle.
The lengths were made deliberately with small differences in order to know the diameter without going crazy in the measurement.

5 axles are to cover all the needs of Position:
Art 23647 2.36 mm diameter 47 mm long
Art 23654 2.36 mm diameter 54 mm long
Art 23748 2.37 mm diameter 48 mm long
Art 23753 2.37 mm diameter 53 mm long
Art 23749S 2.37 mm diameter 49 mm in length with the central downloaded.

Cart  

No products

0,00 € Shipping
0,00 € Total

Cart Checkout

PayPal